PeliScan user manual

PeliScan is the Petzi reader system enabling to check the validity of tickets. It is an Android app installed on a robust phone (water and dust resistant). Latest updates are mainly made here on the PeliScan Server. To ensure a perfect synchronization of the PeliScan server and the PeliScan reader, make sure the latest PeliScan version is installed on your device.
Please check if it is v.1.6.2 (shown at the bottom left of the PeliScan app menu).

It is important for us to constantly improve this version, so we are looking to read feedback, remarks, problems, suggestions... at support@petzi.ch


1. Before starting

Please ensure you have all the required equipment:

  • 1x PeliScan device (Samsung rugged smartphone)
  • 1x USB power adapter
  • 1x micro-USB charging cable

Make sure your PeliScan device is fully charged before continuing the setup process.

2. Connect to network

Connect the PeliScan to the Internet. Click the 'Wi-Fi' icon, select your network, and enter the password.


3. AutoConfig

The PeliScan has to be configured before doors open. This is performed by generating a QR code and scanning it with the PeliScan.

  • Log in to your account.
  • Click on Set up PeliScan to generate the QR code.
  • Open the "PeliScan" app on your PeliScan device and select "Auto-Configuration".
  • Scan the QR code using the app.

You can now scan tickets – even if you restart the app or the phone – as long as you do not click on 'Close the day.'

4. Start scanning

On your PeliScan device, click on "Scan tickets".
If you get problems reading tickets QR code, you might need to switch on the phone light: click on the "light" button (torch icon).

5. Edit ticket number manually

If you cannot scan a ticket QR code – whatever the reason – click on the “search” button (magnifying glass icon) to enter the ticket number manually.

6. Closing the day/night

To clear all the data the PeliScan needed to manage the tickets (credentials for server communication, tickets' list, events' information and time & date of tickets' validation) in the app, don't forget to click on "Close the day". Data will be synchronized with the main server before they are cleared in the reader device.

(To synchronize with the server, the PeliScan readers use a credential valid only up until noon on the day after the event.)

To close the day in the main menu, click on "Close the day" once you finished checking the tickets. A confirmation message will appear. Click "YES" if you really want to close the day.

After you confirm you want to close the day, you might see a message asking you if you want to "force closing". This means that some data had not been sent to the server. These data include the date & time of tickets' validation.

Otherwise, if you do care about those data, consider the following information: if you close the day before noon on the day after the event and your internet connection is on, you should not have this message. Check first if the PeliScan is connected to your WI-FI. If the message still happens, contact support@petzi.ch.

8. Enable sound info when scanning

If you need to use the sound information (different sounds for wrong tickets and valid tickets), you can enable this option in “Settings” -> “Enable sound".


9. Change language

The PeliScan application is available in three different languages: English, French, and German. Unfortunately, there is currently no direct option in the PeliScan menu to choose your language. You have to change the system language in the phone settings.

10. Update PeliScan Version

To get the latest version uploaded on your PeliScan, you need to be connected to the Internet. If an update is available, it will be installed when you launch your PeliScan application. If you get the message “Install blocked”, you have to enable the option “Unknown sources” (“Settings” -> “Security” -> “Unknown sources”). When you get the message “Replace application”, click “OK” and then confirm with “Install”. Once the new application is installed, click “Open”.

11. External Tickets

You can upload tickets from See Tickets to PETZI, but you'll need to request the event's CSV file from your See Tickets agent first. Once you have the file, go to "External Tickets" and upload it to PeliScan just like regular tickets. If you have any questions or if it's your first time using this feature, feel free to contact us at support@petzi.ch.

12. PeliScan test event

Before starting the setup, be sure your PeliScan is connected to a WI-FI Internet connection.

  1. From your PeliScan, select "Auto-Configuration"
  2. Scan the Auto-Configuration QR code
  3. Then scan the test tickets

Auto-Configuration:

Test QR Code

Test tickets:

QR Test 1
QR Test 2
QR Test 3
QR Test 4
QR Test 5

13. Troubleshooting

Don't worry, you're not alone! If you have any concerns or questions, please contact our support team at support@petzi.ch.